Related Experiment Video
Updated: Jul 16, 2026

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
High-performance nano-Schottky diodes and nano-MESFETs made on single CdS nanobelts
Ren-Min Ma1, Lun Dai, Guo-Gang Qin
1School of Physics, Peking University, Beijing 100871, China.
Abstract:
Nano-Schottky diodes and nanometal-semiconductor field-effect transistors (MESFETs) on single CdS nanobelts (NBs) have been fabricated and studied. The Au/CdS NB Schottky diodes have very low reverse current density ( approximately 3.0 x 10-5 A.cm-2 at -10 V reverse bias) and the highest on/off current ratio (approximately 108) reported so far for nano-Schottky diodes. The single CdS NB MESFETs exhibit n-channel normally on (depletion) mode, low threshold voltage (approximately -1.56 V), high transconductance ( approximately 3.5 microS), low subthreshold swing ( approximately 45 mV/dec), and the highest on/off current ratio (approximately 2 x 108) reported so far for nanofield-effect transistors. We also show that the absolute value of threshold voltage for a metal-insulator-semiconductor field-effect transistor made on a single CdS NB can be reduced from approximately 12.5 to approximately 0.4 V and its transconductance can be increased from approximately 0.2 to approximately 3.2 microS by adding an extra Au Schottky contact on the CdS NB, the mechanism of which is discussed.
Related Concept Videos
Schottky Barrier Diode
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...

