Related Experiment Video
Updated: Jul 16, 2026

A Method to Study Adaptation to Left-Right Reversed Audition
Published on: October 29, 2018
The binaural performance of a cross-talk cancellation system with matched or mismatched setup and playback acoustics
Michael A Akeroyd1, John Chambers, David Bullock
1MRC Institute of Hearing Research (Scottish Section), Glasgow Royal Infirmary, Alexandra Parade, Glasgow G31 2ER, United Kingdom. maa@ihr.gla.ac.uk
Abstract:
Cross-talk cancellation is a method for synthesizing virtual auditory space using loudspeakers. One implementation is the "Optimal Source Distribution" technique [T. Takeuchi and P. Nelson, J. Acoust. Soc. Am. 112, 2786-2797 (2002)], in which the audio bandwidth is split across three pairs of loudspeakers, placed at azimuths of +/-90 degrees, +/-15 degrees, and +/-3 degrees, conveying low, mid, and high frequencies, respectively. A computational simulation of this system was developed and verified against measurements made on an acoustic system using a manikin. Both the acoustic system and the simulation gave a wideband average cancellation of almost 25 dB. The simulation showed that when there was a mismatch between the head-related transfer functions used to set up the system and those of the final listener, the cancellation was reduced to an average of 13 dB. Moreover, in this case the binaural interaural time differences and interaural level differences delivered by the simulation of the optimal source distribution (OSD) system often differed from the target values. It is concluded that only when the OSD system is set up with "matched" head-related transfer functions can it deliver accurate binaural cues.
Related Concept Videos
Sound Waves: Interference
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Design Example
Echo
Imagine the sound is reflected back to the ears. Assuming that the source is very close to the human, the difference between hearing the two sounds—the emitted sound and the reflected sound—may be more than the minimum time for perceiving distinct sounds. If this is the case, then the...
Parallel Resonance

