Big answers to big challenges. Interview by Joerg Heber

The process of breathing involves the periodic intake and expulsion of air, known as the respiratory cycle, which typically lasts about five seconds. Modeling the volume of air inhaled into the lungs as a function of time provides insight into both the dynamics and efficiency of pulmonary ventilation. This volume is determined by integrating the airflow rate over time, which captures the cumulative effect of air entering the lungs.Sinusoidal Model of AirflowAirflow during respiration is not...

In an experiment conducted during a Mars mission, a rover propels a projectile with an initial velocity, and the projectile rebounds after colliding with the Martian surface. To ascertain the maximum height attained by the projectile after this collision, the known restitution coefficient and acceleration due to gravity are employed.
By designating the launch point as the origin and utilizing kinematic equations, the vertical component of the projectile's velocity at the point of impact is...

The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...

Effective problem-solving consists of two steps: 1. identifying the problem and 2. selecting the appropriate problem-solving strategy (i.e., a plan of action used to find a solution). Humans use four problem-solving strategies:

The principle of virtual work is an essential concept in the field of mechanics and engineering. This is used to solve problems related to the equilibrium of a structure or system. It is based on the assumption that if a system is in equilibrium, the work done by all the forces during a virtual displacement is zero. This principle is applied by considering virtual displacements of the system and the corresponding work done by internal and external forces.
To apply the principle of virtual work,...

Water flow in open channels is often measured using hydraulic structures such as weirs, which allow precise calculation of discharge. In a rectangular channel, flow rates are measured using three types of weirs: rectangular sharp-crested, triangular sharp-crested, and broad-crested. The weir head is set at a fixed height above the channel bottom, simplifying calculations and enabling the relationship between depth and flow rate to be analyzed.For the rectangular sharp-crested weir, the flow...