Related Experiment Video
Updated: Jul 15, 2026

Ex Vivo Porcine Experimental Model for Studying and Teaching Lung Mechanics
Published on: April 19, 2024
A new expiratory support system for resolving air trapping in lungs during mechanical ventilation: a lung model study
Akinori Uchiyama1, Masaji Nishimura, Mitsuyuki Amata
1Osaka University Hospital Intensive Care Unit, Osaka, Japan. auchiyama@hp-icu.med.oska-u.ac.jp
Abstract:
The aim of the study was to assess a new expiratory support (ES) system in resolving air trapping in the lungs during mechanical ventilation. The ES system consisted of a cylinder and two valves that were connected to the ventilatory circuit. The movements of them were synchronized with the ventilator. The cylinder aspirated gas during expiration. We compared the effects of the ES on air trapping between a narrower and an ordinary size endotracheal tube (ETT) (internal diameter (ID): 5 and 8 mm). In addition, we compared the effects of the ES on air trapping between normal and high airway resistance of the lungs (5 and 20 cm H(2)O/L/s). The ventilatory settings were as follows: volume controlled ventilation with constant inspiratory flow rate; tidal volume, 0.5 L; inspiratory time, 1.0 s; expiratory time, 1.0, 1.5, or 2.0 s; and PEEP, 0 cm H(2)O. The ES normalized the end-expiratory alveolar pressure of the 5 mm ID ETT at a level similar to that of the 8 mm ID ETT. The ES also resolved the air trapping induced by the high airway resistance of the lungs. In conclusion, the ES system resolved the air trapping associated with a narrow endotracheal tube and high airway resistance of the lungs.
Related Concept Videos
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Cardiopulmonary Resuscitation II: ACLS Airway Management
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Mechanical Ventilation I: Indication and Settings