Design of a large-scale surface-aerated bioreactor for biomass production using a VOC substrate

P Acai1, M Polakovic

  • 1Department of Chemical and Biochemical Engineering, Institute of Chemical and Environmental Engineering, Faculty of Chemical and Food Technology, Slovak University of Technology, Radlinského 9, 812 37 Bratislava, Slovak Republic.

Related Concept Videos

Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
Designing Growth Media for Bioreactors01:30

Designing Growth Media for Bioreactors

Growth media provide essential nutrients that support cell growth and metabolism, thereby enhancing the yield of valuable products such as enzymes, antibiotics, and biomass. Designing an effective growth medium involves balancing all components to prevent nutrient limitations or toxic excesses, both of which can impair growth and reduce product yields.Composition of a Typical Growth MediumA typical growth medium contains carbon and nitrogen sources, salts, vitamins, trace elements, and...
Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Scale-Up Processes01:14

Scale-Up Processes

The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...
Bioremediation00:46

Bioremediation

Bioremediation is the use of prokaryotes, fungi, or plants to remove pollutants from the environment. This process has been used to remove harmful toxins in groundwater as a byproduct of agricultural run-off and also to clean up oil spills.
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.