Related Experiment Video
Updated: Mar 3, 2026

Ceramic Omnidirectional Bioprinting in Cell-Laden Suspensions for the Generation of Bone Analogs
Published on: August 8, 2022
Self-setting properties and in vitro bioactivity of calcium sulfate hemihydrate-tricalcium silicate composite bone
1Biomaterials and Tissue Engineering Research Center, Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 Dingxi Road, Shanghai 200050, China.
Abstract:
Self-setting biomaterials are widely used for tissue repair and regeneration. Calcium sulfate hemihydrate has been used for many years as a self-setting biomaterial due to its good setting properties. However, too fast a degradation rate and lack of bioactivity have limited its application in orthopaedic field. Herein, tricalcium silicate was introduced into calcium sulfate hemihydrate (CaSO(4).1/2H(2)O) to form a calcium sulfate hemihydrate-based composite, and its behavior as a cement was studied in comparison with pure calcium sulfate hemihydrate. The results indicated that the workability and setting time of the composite pastes are higher than those of pure CaSO(4).1/2H(2)O, and the composite pastes showed much better short- and long-term mechanical properties than those of pure CaSO(4).1/2H(2)O. Moreover, the biphasic specimens showed significantly improved bioactivity and degradability compared with those of pure CaSO(4).1/2H(2)O, indicating that the composite cements might have a significant clinical advantage over the traditional CaSO(4).1/2H(2)O cement.
Related Concept Videos
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Setting Time of Cement
Soundness of Cement
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...

