Microcantilever-based sensors: effect of morphology, adhesion, and cleanliness of the sensing surface on surface...

The surface stress response of micromechanical cantilever-based sensors was studied as a function of the morphology, adhesion, and cleanliness of the gold sensing surface. Two model systems were investigated: the adsorption of alkanethiol self-assembled monolayers at the gas-solid interface and the potential-controlled adsorption of anions at the liquid-solid interface. The potential-induced surface stress, on a smooth and continuous polycrystalline Au(111)-textured microcantilever in 0.1 M HClO4, is in excellent agreement with macroscopic Au(111) single-crystal electrode results. It is shown that ambient contaminants on the sensing surface dramatically alter the surface stress-potential response. This observation can be misinterpreted as evidence that for polycrystalline Au(111) microcantilever electrodes, surface stress is dominated by surface energy change. Results for anions adsorption on gold are in contrast to the gas-phase model system. We demonstrate that the average grain size of the gold sensing surface strongly influences the magnitude of the surface stress change induced by the adsorption of octanethiol. A 25-fold amplification of the change in surface stress is observed on increasing the average gold grain size of the sensing surface from 90 to 500 nm.