Sensor systems, electronic tongues and electronic noses, for the monitoring of biotechnological processes

Production of biofuel is based on the conversion by microorganisms of complex organic substrates into the methane or ethanol, which are consequently used as energy sources. Real time monitoring of the fermented media composition is of paramount for the effectiveness of the whole process. However, despite the fact that products worth billions of dollars are produced through fermentation processes annually, analytical instruments used for these processes' monitoring remain relatively primitive. Established laboratory techniques produce exhaustive information about media composition but analysis is often quite time-consuming, expensive, requires skilled personnel and hardly can be automated. Lack of on-line sensors for the fermentation monitoring is commonly stressed in the literature. One of the techniques particularly suitable for this purpose is chemical sensors. Such features as low prices, relatively simple instrumentation, minimal sample preparation and easy automation of measurements make chemical sensors an attractive tool for industrial process control. However, practical use of chemical sensors in complex media is often hindered by their insufficient selectivity. For example, only pH and oxygen probes are routinely used in bio-reactors. One of the emerging approaches permitting to overcome the selectivity problems is the use of systems instead of discrete sensors. Such systems for liquid and gas analysis were named electronic tongues and electronic noses correspondingly. They are capable to perform both quantitative analysis (components' concentrations) and classification or recognition of multicomponent media. This review presents recent achievements in the R&D and applications of electronic tongues and noses to the monitoring of biotechnological processes.