Related Experiment Videos
Adaptive neural network control of nonlinear systems by state and output feedback
Abstract:
This paper presents a novel control method for a general class of nonlinear systems using neural networks (NNs). Firstly, under the conditions of the system output and its time derivatives being available for feedback, an adaptive state feedback NN controller is developed. When only the output is measurable, by using a high-gain observer to estimate the derivatives of the system output, an adaptive output feedback NN controller is proposed. The closed-loop system is proven to be semi-globally uniformly ultimately bounded (SGUUB). In addition, if the approximation accuracy of the neural networks is high enough and the observer gain is chosen sufficiently large, an arbitrarily small tracking error can be achieved. Simulation results verify the effectiveness of the newly designed scheme and the theoretical discussions.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control Systems
At the heart...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear.
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length, the...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...