Protection against impact with the ground using wearable airbags

Incidental falls from heights, falls on the same level caused by slipping or tripping, and falls from wheelchair overturns are commonplace phenomena, associated with serious injuries from impact with the ground. A wearable airbag device is a countermeasure applicable to all these types of incidents. Three types of wearable airbag systems were developed and evaluated: for protection against falls from heights (Type-1), against wheelchair overturns (Type-2), and against falls on the same level (Type-3). The systems consist of an airbag, sensor, inflator, and jacket. The sensor detects the fall and the airbag inflates to protect the user. Fall tests using dummies with/without the airbags demonstrated the effectiveness of these devices. In the experiments with system Type-1, for fall heights of less than 2m, the airbags reduced the impact acceleration, and the Head Injury Criterion (HIC) values were under 1,000, the auto-crash test requirement. However, there are limits to the amount of protection afforded: in Type-1, the airbag can protect only the back of the head.; in Types-2 and 3, the fall height of the center of gravity is lower than 2m, and there is some margin of extra protective resource, which can be used to extend the protected area.