Related Experiment Video
Updated: Jul 7, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Influence of ionic strength, electrolyte type, and NOM on As(V) adsorption onto TiO2
Guo J Liu1, Xiang R Zhang, L McWilliams
1Department of Civil Engineering and Geological Sciences, University of Notre Dame, Notre Dame, IN 46556, USA.
Abstract:
As(V) adsorption onto a commercially available TiO2 (Degussa P25) in NaCl or NaClO4 at various concentrations (0.001-0.1 M) was investigated. The effect of natural organic matter (NOM) on As(V) removal through the adsorption by TiO2 was also examined. In either electrolyte, As(V) adsorption onto TiO2 increased with the increase of ionic strength under alkaline conditions (pH 7.0-11.0). Under acidic conditions (pH 4.0-6.0), the adsorption of As(V) onto TiO2 was insensitive to ionic strength in NaClO4 electrolyte but decreased with increasing ionic strength in NaCl electrolyte. The presence of 2-15 mg/L NOM as C significantly decreased the fraction of As(V) adsorbed onto TiO2 at pH 6.0 regardless of the initial As(V) concentration (1-15 microM). The measurement of zeta potential of TiO2 with and without As(V) suggests that the presence of As(V) can shift the point of zero charge (pH(pzc)) of TiO2 to a lower pH value. The overall data presented in this study suggest that As(V) can form both inner-sphere and outer-sphere complexes on TiO2 surface, and NOM is an important factor controlling As(V) adsorption onto TiO2.
Related Concept Videos
Ionic Strength: Overview
Ionic Strength: Effects on Chemical Equilibria
In this solution, the primary cation—the calcium...
Adsorption Isotherms II
Factors Affecting Activity Coefficient
The activity coefficient value for an ion is close to one when the solution has almost zero ionic strength, i.e., when the solution shows close to ideal behavior. As the ionic strength of the solution increases from 0 to 0.1 mol/L, a decrease in the...
Adsorption Isotherms I
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

