Related Experiment Video
Updated: Jul 7, 2026
10:42
Infrared Degenerate Four-wave Mixing with Upconversion Detection for Quantitative Gas Sensing
Published on: March 22, 2019
Mid-infrared vertical-cavity surface-emitting lasers for chemical sensing
W W Bewley1, C L Felix, I Vurgaftman
1Hughes Research Laboratory, MS RL63, Malibu, California 90265, USA.
Applied Optics
|February 29, 2008
Abstract:
The first (to our knowledge) III-V mid-IR vertical-cavity surface-emitting lasers (lambda = 2.9 microm) are demonstrated and show promising characteristics for chemical detection applications. The cw optical-pumping threshold is low (4 mW at 80 K) and efficiency is high (5.6% W/W). Pulsed operation is obtained up to 280 K and cw up to 160 K. Lateral-mode confinement will lead to spectrally pure, single-mode output for chemical identification.
Related Concept Videos
01:14UV–Vis Spectrometers
The absorbance of UV and visible (UV–visible) radiations is measured using a UV–visible spectrophotometer. Deuterium lamps, which emit UV radiation, and tungsten lamps, which produce radiation in the visible region, are used as light sources in UV–visible spectrophotometers. A monochromator or prism is used for diffraction grating, i.e., to split the incoming radiation into different wavelengths. A system of slits is used to focus the desired wavelength on the sample cell. Samples for...
01:25IR Spectrometers
There are two main infrared (IR) spectrophotometers: dispersive IR spectrometers and Fourier transform infrared (FTIR) spectrometers. In a dispersive IR spectrometer, a beam of infrared radiation produced by a hot wire is divided into two parallel equal-intensity beams using mirrors. One beam passes through the sample, while another is a reference beam. The beams then move through the monochromator, which separates the radiations into a continuous spectrum of different frequencies. The...