Functionalized methanofullerenes used as n-type materials in bulk-heterojunction polymer solar cells and in...

The synthesis of two well-solubilized [60]methanofullerene derivatives ( p- EHO-PCBM and p- EHO-PCBA) is presented for usage in organic solar cells and in field-effect transistors. The para position of the PCBM's phenyl ring was substituted with a branched alkoxy side chain, which contributes to higher solubility, facilitating synthesis, purification, and processing. We find a small change of the open-circuit voltage ( V oc) as a slight improvement in performance upon application in P3HT/[60]methanofullerene bulk-heterojunction-photovoltaic cells, when compared to PCBM, because of the electron donation of the alkoxy group. In the case of the devices with a TiO x layer, the best power conversion efficiencies (PCE, eta e) is observed in a layered structure of P3HT/ p- EHO-PCBA/TiO x (eta e = 2.6%), which slightly exceeds that of P3HT/PCBM/TiO x (eta e = 2.3%) under conditions reported here. This can be attributed, in part, to the carboxylic acid group in p- EHO-PCBA that leads to an effective interface interaction between the active layer and TiO x phase. In addition, n-channel organic field-effect transistor (OFET) devices were fabricated with thin films of p- EHO-PCBM and p- EHO-PCBA, respectively cast from solution on SiO 2/Si substrates. The values of field-effect mobility (mu) for p- EHO-PCBM and p- EHO-PCBA are 1 x 10 (-2) and 1.6 x 10 (-3) cm (2)/V.s, respectively. The results in this paper demonstrate the effects of a carboxylic acid group and an electron-donating substituent in [60]methanofullerenes as n-type materials with respect to organic solar cells and OFET applications.