Assessments of lung digestion methods for recovery of fibers

Evaluation of the pulmonary hazards associated with exposure to fibrous materials tends to be more complicated than assessments required for particulate materials. Fibers are defined by aspect ratios and it is generally considered that physical dimensions play an important role in the pathogenesis of fiber-related lung diseases. Several digestion techniques have been used to recover fibers from exposed lung tissue for clearance studies. Because many of the digestion fluids are corrosive (e.g., bleach, KOH), it is conceivable that the dimensions of recovered fibers are modified during the tissue digestion methods to assess whether the physical dimensions of bulk samples of fibers were altered following simulated digestion processing. Aliquots of crocidolite and chrysotile asbestos, Kevlar aramid, wollastonite, polyacrylonitrile (pan)-based carbon, and glass fibers were incubated with either saline, bleach, or KOH and then filtered. Scanning electron microscopy techniques were utilized to measure the physical dimensions (i.e., lengths and diameters) of at least 160 fibers per treatment group of each fiber type. Our results showed that the lengths and diameters of glass fibers and wollastonite were altered after treatment with KOH. In addition, treatment with bleach produced a small reduction in both asbestos fiber-type diameters, and greater changes in Kevlar and wollastonite diameters and carbon fiber lengths (P less than 0.05). These results indicate that lung digestion methods should be carefully assessed for each fiber type before initiating fiber clearance studies.