Determination of uranium and thorium concentrations in unprocessed soil samples

An assay technique that directly determines the amount of 238U and 232Th in unprocessed, bulk soil samples has been developed. In this technique, a sample consisting of a 125-mL plastic bottle full of contaminated, moist, unprocessed soil is irradiated with gamma rays from 57Co. Induced U and Th K alpha fluorescent x rays are detected using a high-purity intrinsic germanium planar detector. Because of sample irradiation geometry, the fluorescent x-ray peaks lie on top of a large Compton backscatter peak. Spectral data are first fit to a combination polynomial and ERFc-step-function background that is subtracted from the peak data. The remaining peak data are fit to a Voigt Profile to properly determine peak area. The Voigt Profile, which is the convolution of the Gaussian response of the detector system and the Lorentzian energy distribution of x rays, describes the spectral peak better than a simple Gaussian distribution. A mathematical point-node model of the source-target-detector system, which includes fluorescent x-ray production by singly scattered Compton gamma s, calculates the predicted x-ray peak area per Bq cm-3 of target contamination. Soil attenuation coefficients, which are measured for each sample, are used by the model to properly transport gamma s and x rays through the soil sample. The sample 238U and 232Th concentrations are then calculated by dividing the measured peak areas by the model-predicted peak areas per Bq cm-3. No "soil standards," no assumptions about progeny equilibrium, and no sample preparation are required for this technique.