A Monte Carlo model for independent dose verification in serial tomotherapy
Vikren Sarkar1, Sotirios Stathakis, Nikos Papanikolaou
1Cancer Therapy and Research Center at the University of Texas Health Science Center at San Antonio, 7979 Wurzbach Road, MC 7889/Radiation Oncology, San Antonio, TX 78229, USA.
Abstract:
Due to the very high complexity of IMRT treatment plans, it is imperative to perform dose verification, preferably before patient delivery. The aim of this project is to develop a Monte-Carlo-based model to verify the final dose distributions of plans developed using the Peacock system (CORVUS Treatment Planning System and MIMiC collimator). The system delivers radiation through arc therapy and uses sinogram files to determine the state of each of the multileaf collimator leaves. In-house software was developed using Matlab to decode the sinograms and create blocklets that are used as input in an MCSIM model of the MIMiC collimator attached to a Varian Clinac 600C. After validating the model, a prostate and head and neck case were simulated. The CORVUS-predicted dose distributions were compared with the Monte Carlo dose distributions. As expected, the results agreed very closely for the homogeneous case of the prostate but there were large discrepancies observed for the more heterogeneous head and neck case.
More Related Videos
06:20Irradiator Commissioning and Dosimetry for Assessment of LQ α and β Parameters, Radiation Dosing Schema, and in vivo Dose Deposition
Published on: March 11, 2021
07:31Characterization of Recombination Effects in a Liquid Ionization Chamber Used for the Dosimetry of a Radiosurgical Accelerator
Published on: May 9, 2014
Related Concept Videos
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
Dose Size and Dosing Frequency: Determination Methods
Determination of Multiple Dosing Parameters: Loading and Maintenance Doses
Positron Emission Tomography
One of the main requirements of a PET scan is a positron-emitting radioisotope, which is produced in a cyclotron and then attached to a substance used by the part of the body being...
