Related Experiment Video
Updated: Jun 27, 2026

Real-time Breath Analysis by Using Secondary Nanoelectrospray Ionization Coupled to High Resolution Mass Spectrometry
Published on: March 9, 2018
Analysis of exhaled breath from smokers, passive smokers and non-smokers by solid-phase microextraction gas
Bogusław Buszewski1, Agnieszka Ulanowska, Tomasz Ligor
1Faculty of Chemistry, Nicolaus Copernicus University, , Poland. bbusz@chem.uni.torun.pl
Abstract:
In this study, 38 samples of expired air were collected and analyzed from 20 non-smoking volunteers, four passive smokers and 14 smokers (21 women and 17 men). Measurements were carried out using solid-phase microextraction (SPME) as an isolation and preconcentration technique. The determination and identification were accomplished by gas chromatography coupled with mass spectrometry (GC/MS). Our data showed that ca 32% of all identified compounds in the breath of healthy non-smokers were saturated hydrocarbons. In the breath of smoking and passive smoking volunteers hydrocarbons were predominant, but also present were more exogenous analytes such as furan, acetonitrile and benzene than in the breath of non-smokers. Acetonitrile, furan, 3-methylfuran, 2,5-dimethylfuran, 2-butanone, octane and decane were identified in breath of smoking and passive smoking persons.
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Types of Detectors-II
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...

