Related Experiment Video
Updated: Jun 26, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Biological sulfide oxidation using autotrophic Thiobacillus sp.: evaluation of different immobilization methods and
P Ravichandra1, M Gopal, J Annapurna
1Bioengineering and Environmental Centre, Indian Institute of Chemical Technology, Tarnaka, Hyderabad, India.
Aims:
Evaluation of various immobilization methods and bioreactors for sulfide oxidation using Thiobacillus sp. was studied.
Methods And Results:
Ca-alginate, K-carrageenan and agar gel matrices (entrapment) and polyurethane foam and granular activated carbon (adsorption) efficacy was tested for the sulfide oxidation and biomass leakage using immobilized Thiobacillus sp. Maximum sulfide oxidation of 96% was achieved with alginate matrix followed by K-carrageenan (88%). Different parameters viz. alginate concentration (1%, 2%, 3%, 4% and 5%), CaCl(2) concentration (1%, 2%, 3%, 4% and 5%), bead diameter (1, 2, 3, 4 and 5 mm), and curing time (1, 3, 6, 12 and 18 h) were studied for optimal immobilization conditions. Repeated batch experiments were carried out to test reusability of Ca-alginate immobilized beads for sulfide oxidation in stirred tank reactor and fluidized bed reactor (FBR) at different sulfide concentrations.
Conclusions:
The results proved to be promising for sulfide oxidation using Ca-alginate gel matrix immobilized Thiobacillus sp. for better sulfide oxidation with less biomass leakage.
Significance And Impact Of The Study:
Biological sulfide oxidation is gaining more importance because of its simple operation. Present investigations will help in successful design and operation of pilot and industrial level FBR for sulfide oxidation.
Related Concept Videos
Microbes and the Sulfur Cycle
Microbial Leaching
Microbial Wastewater Treatment
Microbial Mats
Bioreactor Design and Operational System
Sulfur Assimilation

