Related Experiment Video
Updated: Jun 25, 2026
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
Using mixed solvent and changing spin-coating parameters to increase the efficiency and lifetime of organic solar
Yu Sheng Tsai1, Wei-Ping Chu, Rong-Ming Tang
1Institute of Electro-Optical and Materials Science, National Formosa University, Huwei, Yunlin 63208, Taiwan.
Abstract:
The derivative of C60, i.e., PCBM, and P3HT (3-hexylthiophene) were dissolved in chloroform:dichlorobenzene mixed solvent, then spin-coated as the active layer for organic solar cells (OSC). The experimental parameters were studied carefully to obtain the optimum power conversion efficiency (PCE), including the solvent mixing ratio, spin-coating speed, annealing conditions for the active layer, etc. The OSC devices were packaged with glass and a newly developed UV-glue to improve the lifetime and PCE. Dichlorobenzene solvent has great effect upon the PCE. Changing the spin-coating speed and increasing the number of steps increased the PCE apparently to 1.4%.
