Biochemical performance of tapercut cardiovascular needles

Standardized reproducible tests have been developed to determine the biomechanical performance of cardiovascular needles. The parameters used to assess performance were: 1) sharpness, 2) resistance to bending, and 3) ductility. Four comparable groups of tapercut and taper point cardiovascular needles were selected from different manufacturers for these biochemical studies. The results of this testing demonstrated that needle geometry, needle composition, and the manufacturer were important determinants of needle performance. When comparable needles were evaluated, the biochemical performance of cardiovascular needles manufactured by Ethicon, Inc. (Somerville, NJ) were superior to needles produced by other manufacturers. The superior performance characteristics of the cardiovascular needles produced by Ethicon, Inc. were related to their unique stainless steel alloy, American Society for Testing Materials 45500, which has greater yield and tensile strengths than the alloy used by the other manufacturers. This stainless steel alloy was ideal for the production of tapercut needles, which combined some of the features of a reverse cutting edge needle and taper point needle. Its very short cutting edges allowed it to penetrate the membrane at considerably lower penetration forces than were encountered with comparable taper point needles. In addition, the investigation indicated that the trocar point cardiovascular needles produced a large triangular defect whose diameter was much larger than that of the needle body. For this reason, the use of the trochar point needle is not recommended in cardiovascular surgery.