Related Experiment Video
Updated: Jun 24, 2026

A Silicon-tipped Fiber-optic Sensing Platform with High Resolution and Fast Response
Published on: January 7, 2019
Silicon-on-insulator-based radio frequency single-electron transistors operating at temperatures above 4.2 K
M Manoharan1, Yoshishige Tsuchiya, Shunri Oda
1Quantum Nanoelectronics Research Center and Department of Physical Electronics, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo, Japan. mano@neo.pe.titech.ac.jp
Abstract:
A radio frequency single-electron transistor (RF-SET) based on a silicon-on-insulator (SOI) substrate is demonstrated to operate successfully at temperatures above 4.2 K. The SOI SET was fabricated by inducing lateral constrictions in doped SOI nanowires. The device structure was optimized to overcome the inherent drawback of high resistance with the SOI SETs. We performed temperature variation measurements after five thermal cyclings of the same sample to 4.2 K and found that the single-dot device transport characteristics are highly stable. The charge sensitivity was measured to be 36 microe(rms) Hz(-1/2) at 4.2 K, and the RF-SET operation was demonstrated up to 12.5 K for the first time. This work is an important prerequisite to realizing operation of RF-SETs at noncryogenic temperatures.
Related Concept Videos
Types of Semiconductors
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Fermi Level
At absolute zero temperature, electrons fill all energy states up to the Fermi level, leaving upper states empty. As the temperature rises,...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...

