Related Experiment Video
Updated: Jun 24, 2026

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels
Published on: April 16, 2017
On the conduction pathway for protons in nanocrystalline yttria-stabilized zirconia
Sangtae Kim1, Hugo J Avila-Paredes, Shizhong Wang
1Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, USA. chmkim@ucdavis.edu
Abstract:
In this communication we elucidate a microstructural picture of proton conduction in nano-crystalline yttria-stabilized zirconia at low temperatures (Kim et al. Adv. Mater., 2008, 20, 556). Based on careful analysis of electrical impedance spectra obtained from samples with grain sizes of approximately 13 and approximately 100 nm under both wet and dry atmospheres over a wide range of temperatures (room temperature-500 degrees C), we were able to identify the pathway for proton conduction in this material. It was found that the grain boundaries in nano-crystalline yttria-stabilized zirconia are highly selective for ion transport, being conductive for proton transport but resistive for oxygen-ion transport.
More Related Videos
11:17Spark Plasma Sintering Apparatus Used for the Formation of Strontium Titanate Bicrystals
Published on: February 9, 2017
12:18Co-localizing Kelvin Probe Force Microscopy with Other Microscopies and Spectroscopies: Selected Applications in Corrosion Characterization of Alloys
Published on: June 27, 2022