Electrolytic deposition of hydroxyapatite coating on thermal treated Ti-40Zr

In this study, hydroxyapatite (HA) was coated on both thermal treated and untreated Ti-40Zr substrates by means of electrolytic deposition. It was predicted that the HA layer would increase the bioactivity and osteoconductivity of the Ti-40Zr substrate, and a thermal treatment would improve the bonding strength between the HA layer and Ti-40Zr substrate, and prevent the corrosion of the Ti-40Zr substrate. First, the Ti-40Zr samples were annealed at various temperatures (200, 300, 400, 500 and 600 degrees C respectively). After annealing, samples were immersed in a Ca(NO(3))(2).4H(2)O and (NH(4))(3)PO(4).3H(2)O solution for the electrolytic deposition of the HA coating. Various analyses of the coating were conducted, including surface morphology, phase structure, corrosion resistance, biocompatibility, and bond strength between HA and Ti-40Zr. Experimental results indicated that the bonding strength of the HA coating on the thermal treated Ti-40Zr was markedly improved when compared to that of the HA coating on an untreated Ti-40Zr alloy. The corrosion resistance of Ti-40Zr was also improved by the use of the thermal treatment, as shown by a potentiodynamic polarization test. Finally, osteoblast-like cells cultured on the HA coating surface were found to have proliferated on all samples.