Related Experiment Video
Updated: Jun 23, 2026

Fabrication and Characterization of Superconducting Resonators
Published on: May 21, 2016
Matched wideband low-noise amplifiers for radio astronomy
1Department of Electrical Engineering, California Institute of Technology, Pasadena, California 91125, USA.
Abstract:
Two packaged low noise amplifiers for the 0.3-4 GHz frequency range are described. The amplifiers can be operated at temperatures of 300-4 K and achieve noise temperatures in the 5 K range (<0.1 dB noise figure) at 15 K physical temperature. One amplifier utilizes commercially available, plastic-packaged SiGe transistors for first and second stages; the second amplifier is identical except it utilizes an experimental chip transistor as the first stage. Both amplifiers use resistive feedback to provide input reflection coefficient S11<-10 dB over a decade bandwidth with gain over 30 dB. The amplifiers can be used as rf amplifiers in very low noise radio astronomy systems or as i.f. amplifiers following superconducting mixers operating in the millimeter and submillimeter frequency range.
Related Concept Videos
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
MOSFET Amplifiers
Operational Amplifiers
Small-Signal Analysis of BJT Amplifiers
BJT Amplifiers
In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role extends...
Instrumentation Amplifier
To overcome this challenge, an ECG machine utilizes an instrumentation amplifier. This specialized amplifier is...
