Related Experiment Video
Updated: Jun 23, 2026
Finite Element Analysis Model for Assessing Expansion Patterns from Surgically Assisted Rapid Palatal Expansion
Published on: October 20, 2023
Stem diameter and micromotion of press fit radial head prosthesis: a biomechanical study
Jun-Gyu Moon1, Lawrence J Berglund, Zachary Domire
1Biomechanics Laboratory, Department of Orthopaedic Surgery, Mayo Clinics, Rochester, MN 55905, USA.
Background:
Aseptic loosening of the stem, ranging from mild periprosthetic lucency to symptomatic loosening leading to implant removal, has been reported in press fit radial head prostheses.
Hypothesis:
The purpose of this study was to determine the effect of the stem diameter and insertion force on initial stability with a press fit radial head prosthesis designed for bone ingrowth.
Materials And Methods:
Cadaveric radii were implanted with radial head prostheses of increasing stem diameter. The insertion forces for each rasp and stem were measured. Micromotion of the stem at the isthmus of the canal and stem tip were measured under circumstances simulating eccentric loads.
Results:
Insertion forces for all submaximum-sized rasps were similar. However, the insertion force for the maximum-sized rasp was approximately twice as large, and the insertion force for the oversized rasp was twice as large again, potentially indicating that the insertion force may be useful as a guide for determining appropriate stem size. Micromotions of the maximum diameter stem (isthmus, 41 microm; tip, 64 microm) were near the threshold for bone ingrowth, whereas the micromotions of the submaximum stem (isthmus, 253 microm; tip, 394 microm) were above this threshold.
Discussion:
The maximum diameter stem achieved greater stability (minimum micromotion) compared with the submaximum diameter stem.
Conclusion:
The best fixation strength in the press fit radial head prosthesis was achieved by maximum sizing in the neck canal.
