Related Experiment Video

Updated: Jun 22, 2026

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
09:20

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

Published on: December 7, 2015

Mono-distributed single-walled carbon nanotube channel in field effect transistors (FETs) using electrostatic

D W H Fam1, A I Y Tok

  • 1School of Materials Science and Engineering, Nanyang Technological University, Block No. 4.1, 50 Nanyang Avenue, Singapore 639798, Singapore.

Journal of Colloid and Interface Science
|June 30, 2009
PubMed

More Related Videos

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions12:20

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions

Published on: July 22, 2013

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices09:14

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices

Published on: December 7, 2017

Related Concept Videos

Field Effect Transistor01:29

Field Effect Transistor

Field-effect transistors (FETs) are integral to electronic circuits and distinguished by their three-terminal setup: the gate, drain, and source. These transistors operate as unipolar devices, which utilize either electrons or holes as charge carriers, in contrast to bipolar transistors, which use both types of carriers. The primary function of the FET is to modulate the flow of these carriers from the source to the drain through a channel. The voltage difference between the gate and source...