Related Experiment Video
Updated: Jun 20, 2026

Experimental Column Setup for Studying Anaerobic Biogeochemical Interactions Between Iron (Oxy)Hydroxides, Trace Elements, and Bacteria
Published on: December 19, 2017
Immobilization of mercury in sediment using stabilized iron sulfide nanoparticles
Zhong Xiong1, Feng He, Dongye Zhao
1Environmental Engineering Program, Department of Civil Engineering, Auburn University, Auburn, AL 36849, USA.
Abstract:
Mercury (Hg) immobilization using stabilized iron sulfide (FeS) nanoparticles was investigated through a series of batch and column experiments. The nanoparticles were prepared using a low-cost, food-grade cellulose (sodium carboxymethyl cellulose, CMC) as the stabilizer. The hydrodynamic diameter of fresh FeS-CMC nanoparticles was measured to be 38.5+/-5.4nm. Batch tests showed that the nanoparticles can effectively immobilize Hg in a clay loam sediment. The Hg distribution coefficient for the nanoparticles was determined to be 8930+/-1480L/g, which is >4 orders of magnitude greater than for the sediment. When the Hg-laden sediment was treated at an FeS-to-Hg molar ratio of 26.5, the Hg concentration leached into water was reduced by 97% and the TCLP (toxicity characteristic leaching procedure) leachability of Hg was reduced by 99%. Column tests showed that water-leachable mercury from the sediment containing 3120mg/L Hg was reduced by 67% and the TCLP leachability by >77% when the sediment was treated with 67 pore volumes (PVs) of a 0.5g/L FeS nanoparticle suspension. Column tests proved that the stabilized nanoparticles were highly mobile in the sediment and full breakthrough of the nanoparticles occurred at approximately 18 PVs.
Related Concept Videos
Microbes and Other Elemental Cycles
Microbial Bioremediation of Uranium
Precipitation and Co-precipitation
Colloidal precipitates
Acid Mine Drainage
Microbial Leaching

