Noise characterization of a self-mode-locked Ti:sapphire laser
Related Experiment Video
Updated: Jun 19, 2026
Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
Abstract:
The phase and amplitude noise spectra of a self-mode-locked Ti:sapphire laser are measured and compared with the noise characteristics of a colliding-pulse mode-locked (CPM) dye laser. The timing jitter of the Ti:sapphire laser is found to be approximately half that of the CPM laser for jitter rates above 50 Hz. The amplitude noise of both lasers is comparable for frequencies of as much as several hundred kilohertz. However, between 0.5 and 5 MHz the noise spectrum of the Ti:sapphire laser is 126-134 dB below the carrier, while the CPM laser noise is limited by the pump laser at 115-131 dB below the carrier.
