Related Experiment Video

Updated: Mar 15, 2026

Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System
08:59

Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System

Published on: May 22, 2020

6.0K

Abatement of particulate-laden SO(2) in tapered bubble column with internals

Amitava Bandyopadhyay1

  • 1Department of Chemical Engineering, University of Calcutta, 92, A.P.C. Road, Kolkata, 700 009 India.

Air Quality, Atmosphere, & Health
|November 6, 2009
PubMed

More Related Videos

Production and Measurement of Organic Particulate Matter in a Flow Tube Reactor13:29

Production and Measurement of Organic Particulate Matter in a Flow Tube Reactor

Published on: December 15, 2018

8.1K
Tuning a Parallel Segmented Flow Column and Enabling Multiplexed Detection08:01

Tuning a Parallel Segmented Flow Column and Enabling Multiplexed Detection

Published on: December 15, 2015

8.0K

Related Concept Videos

Gas Chromatography: Types of Columns and Stationary Phases01:17

Gas Chromatography: Types of Columns and Stationary Phases

Gas chromatography (GC) relies on stationary phases to separate and analyze components in a sample. There are two main types of stationary phases: liquid and solid. Liquid stationary phases are non-volatile, thermally stable, and chemically inert liquids coated onto the column. Solid stationary phases are particles of adsorbent material, such as silica gel or molecular sieves.
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
2.8K
Atomic Absorption Spectroscopy: Atomization Methods01:25

Atomic Absorption Spectroscopy: Atomization Methods

Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the...
1.8K