Doping effect of CNT and nano-carbon in magnesium diboride bulk

We fabricated carbon nanotube (CNT)- and nano-carbon (NC)-doped MgB2 using an in-situ process in order to improve the critical current density (J(c)) at high magnetic field. We then evaluated the effects of the doped carbon content on phase formation, microstructure, and critical properties. CNT had a diameter and length of 5-10 nm and 0.5-1 microm, respectively, and NC was a sphere with a diameter of 5-30 nm. The bulk MgB(2-x)C(x) samples with x = 0, 0.05, and 0.1 for NC and CNT were fabricated by pressing into pellets and then sintered at 900 degrees C for 30 min. NC was more effective than CNT for carbon doping at the B site in MgB2 and, therefore, the NC-doped MgB2 samples had a lower critical temperature (T(c)) of 35.0-34.7 K than that of the CNT-doped samples (36.4-36.1 K). In addition, the J(c)(B) behavior was improved when NC and CNT were doped due to doping effect. Microstructural observation suggested that the nano-sized and unreacted NC particles and the nanodomain MgB2 acted as effective flux pinning centers for the NC- and CNT-doped MgB2, respectively.