Chemically-speciated on-road PM(2.5) motor vehicle emission factors in Hong Kong

PM(2.5) (particle with an aerodynamic diameter less than 2.5microm) was measured in different microenvironments of Hong Kong (including one urban tunnel, one Hong Kong/Mainland boundary roadside site, two urban roadside sites, and one urban ambient site) in 2003. The concentrations of organic carbon (OC), elemental carbon (EC), water-soluble ions, and up to 40 elements (Na to U) were determined. The average PM(2.5) mass concentrations were 229+/-90, 129+/-95, 69+/-12, 49+/-18microg m(-3) in the urban tunnel, cross boundary roadside, urban roadside, and urban ambient environments, respectively. Carbonaceous particles (sum of organic material [OM] and EC) were the dominant constituents, on average, accounting for approximately 82% of PM(2.5) emissions in the tunnel, approximately 70% at the three roadside sites, and approximately 48% at the ambient site, respectively. The OC/EC ratios were 0.6+/-0.2 and 0.8+/-0.1 at the tunnel and roadside sites, respectively, suggesting carbonaceous aerosols were mainly from vehicle exhausts. Higher OC/EC ratio (1.9+/-0.7) occurred at the ambient site, indicating contributions from secondary organic aerosols. The PM(2.5) emission factor for on-road diesel-fueled vehicles in the urban area of Hong Kong was 257+/-31mg veh(-1) km(-1), with a composition of approximately 51% EC, approximately 26% OC, and approximately 9% SO(4)(=). The other inorganic ions and elements made up approximately 11% of the total PM(2.5) emissions. OC composed the largest fraction (approximately 51%) in gasoline and liquid petroleum gas (LPG) emissions, followed by EC (approximately 19%). Diesel engines showed higher emission rates than did gasoline and LPG engines for most pollutants, except for V, Br, Sb, and Ba.