Biomechanical comparisons of different posterior instrumentation constructs after two-level ALIF: a finite element...

Anterior lumbar interbody fusion (ALIF) with cylindrical cages and supplemental posterior fixation has been widely used for internal disc derangement. However, most researchers have focused on single-level ALIF. Therefore, the biomechanical performance of various fixation constructs after two-level ALIF is not well characterized. This research used three-dimensional finite element models (FEM) with a nonlinear contact analysis to evaluate the initial biomechanical behavior of five types of fixation devices after two-level ALIF (L3/L4, L4/L5) under six loading conditions. These fixation constructs included a three-level pedicle screw and rod, a two-level translaminar facet screw, a two-level transfacet pedicle screw, a bisegmental pedicle screw and rod, and a bisegmental pedicle screw and rod with cross-linking. The FEM's developed in this study demonstrate that, compared to the other four types of posterior fixation constructs analyzed, the three-level pedicle screw and rod provide the best biomechanical stability. Both two-level facet screw fixation constructs showed unfavorable loading in lateral bending. For the construct of the three-level pedicle screw and rod, the middle-segment pedicle screw should not be omitted even though a cross-link is used. The two-level ALIF models with cages and posterior fixation constructs that we developed can be used to evaluate the initial biomechanical performance of a wide variety of posterior fixation devices prior to surgery.