Pulsed resonance spectroscopy applied to turbulent combustion flows
Applied Optics
|February 19, 2010
Summary
Pulsed resonance spectroscopy offers a more accurate way to measure species concentrations in turbulent flows compared to existing methods. This technique shows promise for combustion diagnostics with no major development hurdles identified.
Area of Science:
- Physical Chemistry
- Chemical Engineering
- Spectroscopy
Background:
- Accurate measurement of species concentrations is crucial for understanding and controlling chemically reacting turbulent flows.
- Existing techniques like Raman and Rayleigh scattering have limitations in accuracy and applicability.
Purpose of the Study:
- To discuss the application of pulsed resonance spectroscopy for species concentration measurements.
- To develop the theoretical framework for this spectroscopic technique.
- To analyze its performance under combustion conditions.
Main Methods:
- Development of the theoretical basis for pulsed resonance spectroscopy measurements.
- Performing an uncertainty analysis of the technique.
- Applying the analysis to typical combustion scenarios.
- Discussing experimental considerations for implementation.
Main Results:
- The theory for pulsed resonance spectroscopy in turbulent flows is established.
- Uncertainty analysis indicates significant theoretical accuracy improvements over Raman and Rayleigh scattering.
- The method's applicability to combustion conditions is evaluated.
Conclusions:
- Pulsed resonance spectroscopy presents a theoretically superior method for species concentration measurement in reacting turbulent flows.
- No substantial obstacles are foreseen for the development and implementation of this technique.
- The method holds significant potential for advancing combustion diagnostics and chemical process monitoring.
Related Concept Videos
01:02Flame Photometry: Overview
Flame photometry, also known as flame emission spectrometry, is a technique used for the qualitative and quantitative analysis of elements present in a sample using a flame as the source of excitation energy. The concept of flame photometry was realized in the early 1860s by Kirchhoff and Bunsen, who discovered that specific elements emit characteristic radiation when excited in flames. The first instrument developed for this purpose was used to measure sodium (Na) in plant ash using a Bunsen...
01:27Fast Reactions
Fast reactions occurring in times shorter than the time needed to mix reactants pose a unique challenge for investigation. In a liquid-phase continuous-flow system, reactants A and B are swiftly pushed into the mixing chamber, where mixing occurs within 1 ms. The reaction mixture then flows through an observation tube, and one measures light absorption to determine species concentrations at various points of the tube. This method is most appropriate when relatively large volumes of reactants...
01:24Turbulent Flow
Turbulent flow is characterized by unpredictable fluctuations in velocity and pressure, which result in a chaotic fluid movement distinct from the orderly patterns of laminar flow. While laminar flow is governed by smooth, parallel layers with minimal mixing, turbulent flow exhibits highly irregular, three-dimensional patterns. This behavior arises due to instabilities in the fluid's velocity profile, and amplifies as the flow velocity increases. Minor disturbances, known as turbulent spots,...
01:12Double Resonance Techniques: Overview
Double resonance techniques in Nuclear Magnetic Resonance (NMR) spectroscopy involve the simultaneous application of two different frequencies or radiofrequency pulses to manipulate and observe two distinct nuclear spins. One important application of double resonance is spin decoupling, which selectively suppresses coupling with one type of nucleus while observing the NMR signal from another nucleus, simplifying the spectrum and enhancing resolution.
Spin decoupling is usually achieved by...
Spin decoupling is usually achieved by...
02:14Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
The low reactivity in alkanes can be attributed to the non-polar nature of C–C and C–H σ bonds. Alkanes, therefore, were initially termed as “paraffins,” derived from the Latin words: parum, meaning “too little,” and affinis, meaning “affinity.”
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified petroleum gas (LPG), fuel oil, gasoline, diesel fuel, and...
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified petroleum gas (LPG), fuel oil, gasoline, diesel fuel, and...
01:17NMR Spectrometers: Radiofrequency Pulses and Pulse Sequences
A pulse is a short burst of radio waves distributed over a range of frequencies that simultaneously excites all the nuclei in the sample. Upon passing a radio frequency pulse along the x-axis, the nuclei absorb energy corresponding to their Larmor frequencies and achieve resonance. This shifts the net magnetization vector from the z-axis toward the transverse plane. This angle of rotation of the magnetization vector, or the flip angle, is proportional to the duration and intensity of the pulse.