Reclamation system design of nanostructured coatings of touch-panel

A newly design reclamation system using an ultrasonic micro electroetching (UMECE) as a machining process for Indium-tin-oxide(ITO) nanostructured coatings dissolved from a surface of polyethyleneterephthalate (PET) of touch-panel is presented. The design features of the reclamation mechanism and a designed wedge-form tool are of major interest. The low yield of ITO nanostructured coatings is an important factor in optoelectronic semiconductor production. In the current experiment, a small diameter of the anode accompanying with a small distance between the two anodes, reduced the amount of time for effective ultrasonic micro electroetching of ITO since the effect of removal is facilitated by supplying sufficient electrochemical power. The performance of ultrasonics was found to be more effective than pulsed current, requiring no increase in electric power. Additionally, electric power, when combined with a fast feed rate, provides highly effective dissolution. Higher frequency or the greater power of ultrasonics corresponds to a higher dissolution rate for ITO nanostructured coatings. A small anode of the wedge-form tool or a small size of the cathode takes less time for the same amount of ITO removal. Importantly, ultrasonic micro electroetching with the designed wedge-form tool requires only a short period of time to dissolve the ITO's nanostructured coatings easily and cleanly.