Related Experiment Video
Updated: Jun 13, 2026

10:42
Infrared Degenerate Four-wave Mixing with Upconversion Detection for Quantitative Gas Sensing
Published on: March 22, 2019
Atmospheric pressure monitoring of trace gases using tunable diode lasers
Applied Optics
|April 15, 2010
Abstract:
High-sensitivity measurements of infrared absorptions due to isolated lines broadened by air at atmospheric pressure are reported. Tunable diode lasers and harmonic techniques were employed to detect absorptions as small as 0.01% over path lengths up to 250 m through the open air. The limiting noise source is caused by a base line signal which varies with the optical alignment. The reported sensitivity is not a fundamental limit. Techniques for further increasing sensitivity are discussed.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
In gas chromatography, different detectors are employed to meet specific analytical needs. These detectors are often categorized based on their detection mechanisms and the types of compounds they are best suited to analyze. Thermal Conductivity Detectors (TCD), Flame Ionization Detectors (FID), and Electron Capture Detectors (ECD) represent common categories, each with unique operating principles and applications. However, beyond these, several other detectors are designed for more specialized...
Gas Chromatography: Types of Detectors-I
There are different types of detectors used in gas chromatography, each with its own specific properties that make it suitable for detecting certain types of analytes. The most commonly used detectors in GC are thermal conductivity detector (TCD), flame ionization detector (FID), and electron capture detector (ECD).
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...

