Nucleation and growth of octacalcium phosphate on treated titanium by immersion in a simplified simulated body fluid
Related Experiment Video
Updated: Jun 13, 2026

Platelet-Derived Extracellular Vesicle Functionalization of Ti Implants
Published on: August 5, 2021
Enori Gemelli1, Cristiane Xavier Resende, Gloria Dulce de Almeida Soares
1Department of Mechanical Engineering, Center of Technological Science, State University of Santa Catarina, Campus Universitario, Bairro Bom Retiro, 631, Joinville 89223-100, SC, Brazil. gemelli@joinville.udesc.br
Abstract:
A simplified simulated body fluid solution (S-SBF) was used to study the kinetics and mechanism of nucleation and growth of octacalcium phosphate (OCP) on the surfaces of alkali and heat-treated titanium samples. After the alkali and heat treatments, the samples were soaked in S-SBF for periods varying up to 24 h. A thin layer of poorly crystallized calcium titanate was formed after 15 min of immersion, allowing for the deposition of another layer of amorphous calcium phosphate (ACP). After 2.5 h of immersion, OCP nuclei were observed on the surface of the ACP layer. After 5 h of immersion in S-SBF solution, the specimens were completely covered with a homogeneous plate-like layer of OCP. Analyses by transmission electron microscopy revealed that nucleation and growth of OCP occurred concomitantly to the crystallization of ACP in hydroxyapatite (HA). This transformation took place by solid-state diffusion, forming a needle-like HA structure underneath the OCP film.
More Related Videos
12:19Multi-Scale Modification of Metallic Implants With Pore Gradients, Polyelectrolytes and Their Indirect Monitoring In vivo
Published on: July 1, 2013
14:55Analysis of Minerals Produced by hFOB 1.19 and Saos-2 Cells Using Transmission Electron Microscopy with Energy Dispersive X-ray Microanalysis
Published on: June 24, 2018