Related Experiment Video
Updated: Jun 12, 2026
Atomic Force Microscopy Cantilever-Based Nanoindentation: Mechanical Property Measurements at the Nanoscale in Air and Fluid
Published on: December 2, 2022
Wear-resistant diamond nanoprobe tips with integrated silicon heater for tip-based nanomanufacturing
Patrick C Fletcher1, Jonathan R Felts, Zhenting Dai
1Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61820, USA.
None:
We report exceptional nanoscale wear and fouling resistance of ultrananocrystalline diamond (UNCD) tips integrated with doped silicon atomic force microscope (AFM) cantilevers. The resistively heated probe can reach temperatures above 600 degrees C. The batch fabrication process produces UNCD tips with radii as small as 15 nm, with average radius 50 nm across the entire wafer. Wear tests were performed on substrates of quartz, silicon carbide, silicon, or UNCD. Tips were scanned for more than 1 m at a scan speed of 25 mum s(-1) at temperatures ranging from 25 to 400 degrees C under loads up to 200 nN. Under these conditions, silicon tips are partially or completely destroyed, while the UNCD tips exhibit little or no wear, no signs of delamination, and exceptional fouling resistance. We demonstrate nanomanufacturing of more than 5000 polymer nanostructures with no deterioration in the tip.
