Simultaneous RP-HPLC and HPTLC Estimation of Fluoxetine Hydrochloride and Olanzapine in Tablet Dosage Forms

A binary mixture of fluoxetine HCl and olanzapine was determined by two different methods. The first method involved determination of fluoxetine HCl and olanzapine using reversed-phase liquid chromatography using acetonitrile:methanol:0.032 M ammonium acetate buffer (45:05:50, v/v/v) as the mobile phase at a flow rate of 1.5 ml/min. Quantitation was achieved with ultraviolet detection at 235 nm over concentration ranges of 0.2-4 and 0.1-2 mug/ml; mean accuracies were 101.16+/-0.59 and 99.79+/-0.56% for fluoxetine HCL and olanzapine, respectively. The second method was based on the high performance thin layer chromatography separation of the two drugs followed by densitometric measurements of their spots at 235 nm. The separation was carried out on Merck TLC aluminium sheets of silica gel 60 F254 using acetone:methanol:triethyleamine (5:3:0.5, v/v/v), as mobile phase. The linearity was found to be in the range of 300-1000 and 150-500 ng/spot; mean accuracies were 100.95+/-0.52 and 99.31+/-0.51% for fluoxetine HCl and olanzapine, respectively. The method was successively applied to tablets because no chromatographic interferences from the tablet excipients were found. The methods retained their accuracy and precision when the standard addition technique was applied. The results obtained by applying the proposed methods were statistically analyzed.