Related Experiment Video

Updated: Jun 12, 2026

Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal
10:39

Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal

Published on: January 15, 2016

Optimizing the power output of a ZnO photocell by piezopotential

Youfan Hu1, Yan Zhang, Yanling Chang

  • 1School of Material Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-0245, USA.

ACS Nano
|June 5, 2010
PubMed

More Related Videos

Synthesis and Characterization of High c-axis ZnO Thin Film by Plasma Enhanced Chemical Vapor Deposition System and its UV Photodetector Application08:18

Synthesis and Characterization of High c-axis ZnO Thin Film by Plasma Enhanced Chemical Vapor Deposition System and its UV Photodetector Application

Published on: October 3, 2015

Related Concept Videos

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
Photoelectric Effect02:26

Photoelectric Effect

When light of a particular wavelength strikes a metal surface, electrons are emitted. This is called the photoelectric effect. The minimum frequency of light that can cause such emission of electrons is called the threshold frequency, which is specific to the metal. Light with a frequency lower than the threshold frequency, even if it is of high intensity, cannot initiate the emission of electrons. However, when the frequency is higher than the threshold value, the number of electrons ejected...
Biasing of P-N Junction01:16

Biasing of P-N Junction

The operation of a p-n junction diode involves various biasing conditions, including forward bias, reverse bias, and equilibrium.
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Zener Diodes01:16

Zener Diodes

Zener diodes are specialized semiconductor devices designed to operate in the reverse breakdown region, where they allow current to flow into the cathode, making it positive relative to the anode. This reverse operation distinguishes Zener diodes from conventional diodes and enables their use in various applications, most notably as voltage regulators. One of the defining characteristics of Zener diodes is their nearly vertical I-V (current-voltage) characteristic curve above a certain...