Nitrogen reduction in wastewater treatment using different anox-circulation flow rates and ethanol as a carbon source

We studied the optimization of nitrogen reduction from municipal wastewater in a laboratory-scale modified Ludzack-Ettinger activated sludge wastewater treatment plant (WWTP). The unit consisted of primary denitrification, secondary nitrification, a sludge clarifier and a post-denitrification unit. The process simulates the Kuopio WWTP, which provided the influent utilized. We describe the effect of varying anox-circulation schemes on the nitrogen removal efficiency. We further compare the denitrification efficiencies of ethanol and methanol applied in the post-denitrification unit, and compare the properties and costs of these chemicals as carbon sources. Maximum efficiency of total nitrogen removal (70.8%) was obtained with 256% anox-circulation. The process was, however, not very sensitive, as a wide range of 150-400% of anox-circulations gave good results for nitrogen reduction. The unit achieved high BOD, and COD reductions of wastewater also when nitrogen reduction was moderate. The addition of 40 mg/L/day of ethanol to the post-denitrification tank meant that the nitrate-levels of effluent could be controlled to below 10 mg/L of nitrate nitrogen. Methanol and ethanol were equally effective for denitrification. The use of ethanol instead of methanol could reduce treatment costs by 30% to 0.02 E/m3 of treated wastewater according to 2008 market prices.