Related Experiment Video
Updated: Jun 10, 2026

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
Published on: December 29, 2013
Effect of pH on nutrient dynamics and electricity production using microbial fuel cells
Sebastià Puig1, Marc Serra, Marta Coma
1Laboratory of Chemical and Environmental Engineering (LEQUIA-UdG), Institute of the Environment, University of Girona, Campus Montilivi s/n, Facultat de Ciències, E-17071 Girona, Spain. sebastia@lequia.udg.cat
Abstract:
The aim of this work was to study the effect of pH on electricity production and contaminant dynamics using microbial fuel cells (MFCs). To investigate these effects, an air-cathode MFC was used to treat urban wastewater by adjusting the pH between 6 and 10. The short-term tests showed that the highest power production (0.66 W.m(-3)) was at pH 9.5. The MFC operation in continuous control mode for 30 days and at the optimal pH improved the performance of the cell relative to power generation to 1.8 W.m(-3). Organic matter removal (77% of influent COD) and physical ammonium loss were directly influenced by pH and followed the same behavior as the power generation. At a pH higher than the optimal one, anodic bacteria were affected, and power generation ceased. However, biological nitrogen processes and phosphorus dynamics were independent of the exoelectrogenic bacteria.
Related Concept Videos
Microbial Fuel Cells
Environmental Applications of Microorganisms
Marine Microbial Ecology
Metabolism of Chemolithotrophs
Microbial Nutrition
Microbial Wastewater Treatment

