Biosorption of Reactive Black 5 from aqueous solutions by chitosan: column studies

Fixed-bed column studies were carried out to investigate the dynamic sorption of Reactive Black 5 (RB5) onto chitosan. The effect of operating parameters such as initial dye concentration, superficial flow velocity, bed height and particle size on the sorption of RB5 onto chitosan was studied. Column regeneration, dye recovery and the possibility of reusing the regenerated chitosan were also investigated. The results show that both the breakthrough curves and the adsorption parameters of the column were strongly affected by the operating parameters studied. An analysis of the breakthrough curves indicated that adsorption was affected by mass transfer limitations, probably due to intraparticle diffusion. An empirical model was applied to describe the breakthrough curves, while the Bohart-Adams and BDST models were used to determine the operating parameters useful in the process design. Elution of the column with 0.01 mol L(-1) NaOH allowed the chitosan to be regenerated and the dye to be recovered and concentrated. The concentration factor was 10. Several cycles of adsorption-elution showed that the regenerated chitosan retained good adsorption efficiency and the elution efficiency was always higher than 80%.