Related Experiment Video
Updated: Jun 8, 2026

Remote Laboratory Management: Respiratory Virus Diagnostics
Published on: April 6, 2019
Environmental decontamination of a hospital isolation room using high-intensity narrow-spectrum light
M Maclean1, S J Macgregor, J G Anderson
1Robertson Trust Laboratory for Electronic Sterilisation Technologies (ROLEST), University of Strathclyde, Glasgow, UK. michellemaclean@eee.strath.ac.uk
Abstract:
The performance of a new decontamination technology, referred to as 'high-intensity narrow-spectrum light environmental decontamination system' (HINS-light EDS) was evaluated by a series of three studies carried out in a hospital isolation room used to treat burns patients. The ceiling-mounted HINS-light EDS emits high-intensity 405nm light which, although bactericidal, is harmless to patients and staff thereby permitting continuous environmental disinfection throughout the day. Performance efficacy was assessed by contact agar plate sampling and enumeration of staphylococcal bacteria on environmental surfaces within the room before, during and after HINS-light EDS treatment. When the room was unoccupied, use of HINS-light EDS resulted in ∼90% reduction of surface bacterial levels and when the room was occupied by an MRSA-infected burns patient, reductions between 56% and 86% were achieved, with the highest reduction (86%) measured following an extended period of HINS-light EDS operation. In an on/off intervention study, surface bacterial levels were reduced by 62% by HINS-light EDS treatment and returned to normal contamination levels two days after the system was switched off. These reductions of staphylococci, including Staphylococcus aureus and meticillin-resistant S. aureus, by HINS-light EDS treatment were greater than the reductions achieved by normal infection control and cleaning activities alone. The findings provide strong evidence that HINS-light EDS, used as a supplementary procedure, can make a significant contribution to bacterial decontamination in clinical environments.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Hand hygiene
Hand washing...
