Related Experiment Video
Updated: Jun 8, 2026

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior
Published on: April 13, 2016
Whole-body vibratory response study using a nonlinear multi-body model of seat-occupant system with viscoelastic
Gauri Joshi1, Anil K Bajaj, Patricia Davies
1Ray W. Herrick Laboratories, School of Mechanical Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907-2031, USA.
Abstract:
Vehicle occupants are exposed to low frequency vibrations with possible harmful effects such as mild discomfort, lower back pain, and even injury to the spine. Occupational drivers and operators of heavy machinery are exposed to significantly longer duration and higher levels of vibration. Thus, the modeling and prediction of biodynamic response of seated occupants to such vibrations is very important. Since the properties of seating foam affect the response of the occupant, there is need for good models of seat-occupant systems through which the effects of foam properties on the dynamic response can be directly evaluated. A nonlinear planar seat-occupant model which incorporates the nonlinear viscoelastic behavior of seating foam has been developed. This model is used to study response of the occupant to harmonic excitation applied at the seat base, in terms of the frequency response in vertical and fore-and-aft directions, the deflection shapes at resonance, as well as the seat-to-head-transmissibility. In addition, to better understand the role of flexible polyurethane foam in characterizing the system behavior, the response of a single-degree-of-freedom foam-block system is also studied. The effects of different masses riding on the foam block and undergoing vertical vibrations at different acceleration levels are also investigated.
Related Concept Videos
Normal and Tangetial Components: Problem Solving
Rigid Body Equilibrium Problems - II
Consider two children sitting on a seesaw, which has negligible mass. The first child has a mass (m1) of 26 kg and sits at point A, which is 1.6 meters (r1) from the pivot point B; the second child has a mass (m2) of 32 kg and sits at point C. How far from the pivot point B should the second child sit (r2) to balance the seesaw?
Rigid Body Equilibrium Problems - I
