Related Experiment Video
Updated: Jun 7, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Biosorption of heavy metals from aqueous solutions by chemically modified orange peel
Ningchuan Feng1, Xueyi Guo, Sha Liang
1School of Basic Medical Science, Ningxia Medical University, Yinchuan 750004, China.
Abstract:
Equilibrium, thermodynamic and kinetic studies were carried out for the biosorption of Pb(2+), Cd(2+) and Ni(2+) ions from aqueous solution using the grafted copolymerization-modified orange peel (OPAA). Langmuir and Freundlich isotherm models were applied to describe the biosorption of the metal ions onto OPAA. The influences of pH and contact time of solution on the biosorption were studied. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. According to the Langmuir equation, the maximum uptake capacities for Pb(2+), Cd(2+) and Ni(2+) ions were 476.1, 293.3 and 162.6 mg g(-1), respectively. Compared with the unmodified orange peel, the biosorption capacity of the modified biomass increased 4.2-, 4.6- and 16.5-fold for Pb(2+), Cd(2+) and Ni(2+), respectively. The kinetics for Pb(2+), Cd(2+) and Ni(2+) ions biosorption followed the pseudo-second-order kinetics. The free energy changes (ΔG°) for Pb(2+), Cd(2+) and Ni(2+) ions biosorption process were found to be -3.77, -4.99 and -4.22 kJ mol(-1), respectively, which indicates the spontaneous nature of biosorption process. FTIR demonstrated that carboxyl and hydroxyl groups were involved in the biosorption of the metal ions. Desorption of Pb(2+), Cd(2+) and Ni(2+) ions from the biosorbent was effectively achieved in a 0.05 mol L(-1) HCl solution.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Extraction: Advanced Methods
Microbial Leaching
Bioremediation
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Precipitation and Co-precipitation
Microbial Bioremediation of Uranium