Related Experiment Video
Updated: Jun 6, 2026

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Tuning the electrical performance of Ge nanowire MOSFETs by focused ion beam implantation
T Burchhart1, C Zeiner, A Lugstein
1Institute for Solid State Electronics, Vienna University of Technology, Vienna, Austria.
Abstract:
In this work, we demonstrate an approach to tune the electrical behavior of our Ω-gated germanium-nanowire (Ge-NW) MOSFETs by focused ion beam (FIB) implantation. For the MOSFETs, 35 nm thick Ge-NWs are covered by atomic layer deposition (ALD) of a high-κ gate dielectric. With the Ω-shaped metal gate acting as implantation mask, highly doped source/drain (S/D) contacts are formed in a self-aligned process by FIB implantation. Notably, without any dopant activation by annealing, the devices exhibit more than three orders of magnitude higher I(ON) currents, an improved I(ON)/I(OFF) ratio, a higher mobility and a reduced subthreshold slope of 140 mV/decade compared to identical Ge-NW MOSFETs without FIB implantation.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...

