Related Experiment Video
Updated: Jun 3, 2026

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Factors affecting the treatment of reject water by the anammox process
Zhigang Li1, Yongguang Ma, Daisuke Hira
1Graduate School of Science and Technology, Kumamoto University, 2-39-1 Kurokami, Kumamoto 860-8555, Japan. lzg2004@163.com
Abstract:
Reject water from a municipal wastewater treatment plant was treated using a stirred tank anammox reactor after being treated by a partial nitrification reactor. The results indicated the variations in the influent NO(2)(-)-N to NH(4)(+)-N ratio had a negative effect on reactor performance, especially when the T-N concentrations were high. Influent total organic carbon concentrations greater than 50mg/L were proven to have a serious effect on the nitrogen removal efficiencies of the anammox reactor. Observations by scanning electron microscope showed that the surface of the anammox granular sludge was covered by some materials, possibly the effluent SS contained in the partial nitrified reject water. Furthermore, the study of the bacterial composition of the anammox granular sludge showed that the anammox bacterium, Planctomycete KSU-1, was dominant, even during the inhibition phase.
More Related Videos
Related Concept Videos
Microbial Wastewater Treatment
Biological Treatment of Effluent and Waste Water
Factors Affecting Solubility
Bioreactor Controls-II
Metabolism of Chemolithotrophs
Bioreactor Controls-I

