Related Experiment Video
Updated: Jun 3, 2026

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating
Published on: April 12, 2018
Retention characteristics of Schottky barrier tunneling transistor-nano floating gate memory with various side walls
Sunghwan Won1, Daeho Son, Eunkyeom Kim
1Department of Nano-Science and Technology, University of Seoul, Seoul 130-743, Korea.
Abstract:
At present, the nano floating gate memory (NFGM) device has shown a great promise as a ultra-dense, high-endurance memory device for low-power applications. As the size of the NFGM reduced, the short channel effect became one of the critical issues in the base Field Effect Transistor (FET). Schottky barrier tunneling transistor (SBTT) can improve the controllability of the short channel effect. In this work, we studied nano floating gate memory based on the SBTT. Erbium silicide was employed instead of the conventional heavily doped S/D. The NFGM device based on the SBTT used Si nanocrystals as charge storages. The subthreshold slope and the threshold voltage of the SBTT-NFGM were 90 mV/dec. and 0.2 V, respectively. The memory window appeared about 4 V after the applied write/erase bias at +/- 11 V for 500 ms. The write/erase speeds of the memory device were 50 ms and 200 ms at +/- 13 V, respectively. We also analyzed the retention characteristics of the Schottky barrier tunneling transistor nonvolatile floating gate memory according to the various side walls.
Related Concept Videos
Schottky Barrier Diode
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...

