Related Experiment Video
Updated: Jun 3, 2026

Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production
Published on: December 6, 2021
Improved hydrogen storage kinetics of nanoconfined NaAlH₄ catalyzed with TiCl₃ nanoparticles
Thomas K Nielsen1, Marek Polanski, Dariusz Zasada
1Center for Energy Materials, Interdisciplinary Nanoscience Center (iNANO), and Department of Chemistry, Aarhus University, DK-8000 Aarhus, Denmark.
Abstract:
Nanoparticles of NaAlH(4) have been infiltrated in nanoporous carbon aerogel with TiCl(3) nanoparticles in order to explore possible synergetic effects between nanoconfinement and a functionalized catalytic scaffold. Resorcinol formaldehyde carbon aerogels with an average pore size of 17 nm and total pore volume of 1.26 mL/g were infiltrated with TiCl(3) to obtain an aerogel doped with 3.0 wt % TiCl(3) nanoparticles. NaAlH(4) was melt-infiltrated into the functionalized carbon aerogel at 189 °C and p(H(2)) ∼ 186-199 bar. Energy-dispersive spectrometry (EDS) combined with focused ion beam (FIB) techniques revealed the presence of Na, Al, Ti, and Cl inside the aerogel scaffold material. The infiltrated NaAlH(4) was X-ray amorphous, whereas (27)Al magic-angle spinning (MAS) NMR spectroscopy confirmed the presence of nanoconfined NaAlH(4). Temperature-programmed desorption mass spectroscopy (TPD-MS) and Sieverts' measurements demonstrated significantly improved hydrogen desorption kinetics for this new nanoconfined NaAlH(4)-TiCl(3) material as compared to nanoconfined NaAlH(4) without the catalysts TiCl(3) and to bulk ball-milled samples of NaAlH(4)-TiCl(3). We find that the onset temperature for hydrogen release was close to room temperature (T(onset) = 33 °C), and the hydrogen release rate reached a maximum value at 125 °C, which demonstrates favorable synergetic effects between nanoconfinement and catalyst addition.
More Related Videos
Related Concept Videos
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the surface of...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Radical Substitution: Hydrogenolysis of Alkyl Halides with Tributyltin Hydride
The bonds formed in this reaction are stronger than the bonds broken, making it energetically favorable. The reaction follows a radical chain mechanism similar to radical halogenation reactions,...

