Related Experiment Video
Updated: Jun 3, 2026
Evaluating the Effects of Different Polishing Methods on Color Stability of Dental Restorations in Pediatric Dentistry
Published on: June 6, 2025
Color stability of sealed composite resin restorative materials after ultraviolet artificial aging and immersion in
Anderson Catelan1, André Luiz Fraga Briso, Renato Hermann Sundfeld
1Department of Restorative Dentistry, Aracatuba School of Dentistry (UNESP), Araçatuba, São Paulo, Brazil.
Statement Of Problem:
The color alteration of resin-based materials is one of the most common reasons to replace esthetic dental restorations.
Purpose:
This study assessed the influence of surface sealant (Biscover) on the color stability of nanofilled (Supreme XT) and microhybrid (Vit-l-escence and Opallis) composite resins after artificial aging.
Material And Methods:
One hundred disc-shaped (6 × 1.5 mm) specimens were made for each composite resin. After 24 hours, all specimens were polished and sealant was applied to 50 specimens of each material. Baseline color was measured according to the CIE L*a*b* system using a reflection spectrophotometer. Ten specimens of each group were aged for 252 h in an ultraviolet (UV)-accelerated aging chamber or immersed for 4 weeks in cola soft drink, orange juice, red wine staining solutions or distilled water as control. Color difference (ΔE) after aging was calculated based on the color coordinates before (baseline) and after aging/staining treatment. Data were analyzed with 2-way ANOVA and Fisher's test (α=.05).
Results:
The results showed significant changes in color after artificial aging in all the groups (P<.05). Independent of the material studied, red wine resulted in the highest level of discoloration. Intermediate values were found for orange juice, UV accelerated aging, and the cola soft drink. The lowest values of ΔE were found for specimens stored in distilled water.
Conclusions:
All composite resins showed some color alteration after the aging methods. The surface sealant did not alter the color stability of the tested materials.
